Basic Meth Lab Sani Cloud Kit

Bidding Supports: American Football Association (Binghamton, NY)

Item Number
Online Close:
Feb 29, 2020 11:59 PM EST  –  Bid Extension
Number Sold:
Amount Remaining:

Ask a question about this item


This patented, advanced formula has been used successfully world-wide for over 10 years in every extreme situation you can imagine. Our powerful Sani-Cloud product is proven to effectively cut through bio-film for safe removal and neutralization of tear gas, smoke damage, explosive residue, chemicals used in manufacturing of methamphetamine and all types of biological and chemical hazards.

Sani-Cloud proves its value with excellent results from clearance tests, significantly lowered remediation costs, reduced the overall manpower hours, reduced equipment needs, and other supplies otherwise necessary to meet health and safety guidelines. Sani-Cloud is inherently biodegradable, non-toxic, environmentally safe, reliable and cost effective.

Traditional Meth lab remediation methods can require up to three separate wash downs of all surfaces using a variety of cleaners. Even then, the toxins are never really neutralized; just suspended in water then mechanically removed. With Sani-Cloud, remediators follow the proven protocol and apply the solution to the contaminated surfaces. Once the required reaction time is complete, field test studies have demonstrated that the contamination is destroyed along with the toxin and odorous affect.


Basic Kit Includes:

• 2 Gallons Sani Cloud- 1 gallon each Part A & Part B
• ULV Fogger – 120 Volts AC
• 3M Half Mask Respirator
• Protective Eye Goggles
• 1 Set of Microbial Vapor Acid Gas Filters
• 3 pairs of Nitrile Gloves
• Tyvek Suit and Hood

Special Instructions

What is the nature of the decontamination product we use?
The product we use is inherently biodegradable, 3-part decontamination, disinfectant and deodorizing formula that includes ordinary household substances such as those found in hair conditioner and laundry detergent. It penetrates a microorganism’s outer coating and adds oxygen bonds to the protein chains of the DNA, destroying the microorganism. It is effective even in the presence of organic load, making the decontamination process quick and easy.
How can the decontamination product be applied?
As a liquid, fog or foam. A minimum wet contact time of 10 minutes is required, followed by a water rinse and wipe down. When using the product as a fog, the size of the room, level of contamination and number of surfaces will effect application time. After fogging a building or room, allow at least 8 hours before reentry. Follow label instructions for mixing, application and disposal. Follow local, state and federal agency guidelines for disposal of unused product and empty containers.
Has our decontamination product been tested?
Yes. It has been tested and proven effective in over ten years of US Military and third party laboratory testing. Blend-specific testing performed includes blend testing, product safety testing, material compatibility testing, biodegradability testing, shelf life testing, dermal and inhalation testing, EPA panel testing and Government life agent testing.
Is our decontamination product EPA registered?
Yes. Since our product destroys organic substances, it is technically categorized as a pesticide, and thus requires EPA registration for sale in the United States.
Is it safe to use our decontamination product on skin?
No, it is a skin and mucus membrane irritant, and is not approved nor appropriate for use on skin. Follow first aid instructions on label if skin contact occurs.
How do you know if decontamination is complete?
The only way to determine that a contamination is neutralized is to conduct sampling operations. This procedure should be conducted by personnel trained in sampling techniques. A certified laboratory must analyze biological samples to verify results.
What are the benefits of using our decontamination product compared to other formulas?
Our product is more versatile and effective against a wider range of microorganisms than other commercially available products. It contains surfactants that allow it to reach and encapsulate contamination in pores and hard-to-reach places. The fact that it is an oxidizer as well set it apart, as microorganisms such as mold spores cannot develop resistance against an oxidizer. Most commercial disinfectants target 1 or 2 substances, while our product has been independently tested against a wide array of bacteria, viruses and molds.