Jewelry

Item Description

TAG Heuer Aquaracer - Aquaracer Lady 300 M 27mm Ref: WAY1414.BA0920

Functions

• "AQUARACER - 300M/1000FT" lettering
• "TAG Heuer" logo at 12 o'clock
• 11 diamonds (0.08 CT)on the dial
• Alternate fine-brushed and polished steel case
• Date window at 3 o'clock
• Faceted hour and minute hands with luminescent markers
• Fine-brushed steel folding clasp with safety push-buttons and diving extension
• Polished steel screw-in crown
• Scratch-resistant sapphire crystal with antireflective treatment
• Screw-in caseback with diving bell engraving
• Unidirectional turning polished steel bezel with: - 30 Top Wesselton diamonds - Total: 0.36 ct
• - 30 Top Wesselton diamonds - Total: 0.36

Item Special Note

• Movement

  Quartz movement

  A QUARTZ MOVEMENT
  A quartz movement is powered by a battery. Its regulator (time-measuring device) is a quartz crystal. An electrical current causes the crystal to vibrate very consistently and at a very high frequency (32,768 times per second). This gives the movement almost perfect precision (a variation of only a few seconds per month.)

  Movement performance
  TAG HEUER QUARTZ MOVEMENTS
  Quartz movements used by TAG Heuer are some of the most reliable and accurate made in Switzerland. They are also distinguished by excellent resistance to shocks and magnetic fields.

  Movement display
  TAG HEUER BATTERIES
  The batteries for TAG Heuer quartz movements have a service life of at least two years.

  Movement decoration
  END-OF-LIFE INDICATOR
  For increased security, all TAG Heuer quartz watches (except chronographs) are fitted with an end of battery life indicator (EOL). When the battery shows signs of weakening, the seconds hand starts making four-second jumps every four seconds. However, the movement continues to display the exact time until the battery is exhausted.

• Materials & Care

  Case
  Fine-brushed/polished steel

  Bezel
  Polished steel

  Strap
  Fine-brushed / polished steel

  Cleaning

  To maintain the esthetic appeal of your watch and keep it in good working order, you should clean it regularly as follows:

  • First make sure the crown is fully screwed down.
  • If the seals in your TAG Heuer watch have been changed and tested at an authorized TAG Heuer service centre within the last 12 months, then you can use a soft brush with slightly soapy water to clean the case and bracelet, then rinse it with clear water and dry it with a soft cloth. If your watch is fitted with a strap made from fabric, leather, alligator or python skin, take care not to get it wet
  • If you have any doubts about the water-resistance of your watch, simply clean it with a soft brush then dry it.
  • Avoid contact with chemical products (solvents, detergents, cosmetics, etc.) They may damage the bracelet and the water-resistance gaskets.

  Condensation

  If the temperature changes suddenly, a slight amount condensation may appear under the crystal of your watch. This mist will disappear by itself and will not affect the functioning of the watch. If the condensation persists, please see your official
  TAG Heuer dealer.

  Water resistance

  Water resistance is not a permanent condition.  The rubber seals that are designed to ensure against water entry, are under constant pressure and given time will deteriorate. For this important reason we recommend that a watch should be checked annually to ensure that the seals remain intact. This thorough and extensive testing includes pressure tests and bench tests and is considered an essential element in the care and maintenance of our watches.

  Setup

  For all movements

  • Make sure that your watch is perfectly dry.
  • Move the crown carefully to make the various changes that are possible.
  • Avoid changing the date between 8:00 pm and 4.00 am.
  • Once the changes are made, push the crown back in and (depending on the model) screw it down against the case to preserve its water-resistance.

  For mechanical movements

  • When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (42 – 48 hours depending on the model) is exhausted and the watch stops. To restart it, unscrew the crown if necessary (depending on the model) and wind the movement manually by turning the crown 30- 40 times. This will give it a sufficient power reserve to function normally.
  • A non-automatic mechanical watch has to be wound every day, winding is complete when you feel the crown resist. Your TAG Heuer is then wound to the maximum. It is important not to force the crown of a hand-wound watch to avoid damaging the mechanism.

  Bracelets/Leather straps

  Straps in fabric, leather and alligator or python skin

  • Avoid all contact with water (baths, showers etc). Despite your care and attention, leather is a natural, living material and its color will fade a little over time.
• Quality

  

  The high level of TAG Heuer quality is founded on the rigorous choice and continuous monitoring of all its suppliers and their products. Throughout the manufacturing process, each component is subjected to numerous tests and controls designed to verify how carefully it has been made.

• Authenticity

  Purchasing your watch direct from TAG Heuer is your guarantee of authenticity. Each watch has an individual, traceable serial number.

  We've partnered with trusted.com to optionally provide you with an eTitle for your time piece. Provided at no cost is your personal proof of authenticity and ownership

  To learn more about TAG Heuer and trusted.com's partnership, see our authenticity page.